Peek's line of ADR brand automatic data recorders include three models: the ADR-1000 Plus portable counter, the larger ADR-2000 Plus portable counter, and the rack-mounted, fully configurable ADR-3000 traffic counter/classifier.
ADR-1000 Plus (Portable Traffic Counter/Classifier)
The Peek ADR-1000 Plus provides ease of use and optimal functionality as a portable counter/classifier. Optional internal sensor modules allow the ADR-1000 Plus to monitor inputs using loops, piezos or contact closures. A removable PCMCIA memory card is also available to further extend storage capability.
With preprogrammed quick setup features, field personnel need only press one or two keys to select recording operation. The type, configuration and format of data to be collected can be custom programmed or selected from menu driven choices.
Features of the ADR-1000 Plus
- Portable traffic counter/classifier
- 2MB onboard memory
- PCMCIA memory option for additional storage
- Quick set up, easy to use
- Scheme “F” or user-defined classification scheme
- Solar power option
- Water-barrier airswitches
- Weatherproof housing
- U.S. standard or metric units
- Battery “sentinel”
- Multiple studies
- Auto daylight savings time
ADR-2000 Plus (Portable Traffic Counter/Classifier)
The Peek ADR-2000 Plus provides optimal functionality as a portable or semi-permanent unit. In its basic configuration as a counter/classifier, 2 or 4 road tubes are available. With optional internal sensor modules, the ADR-2000 Plus can monitor up to 42 inputs using a combination of loops, piezos or contact inputs.
Available data types include per vehicle records, per lane data, binned vehicle classification by axle, speed, length, gap, headway or combinations of the above. Vehicles may be classified according to the FHWA Scheme “F” or a user-defined, custom classification scheme.
Features of the ADR-2000 Plus
- Portable traffic counter/classifier
- Simple to setup and operate
- 2 MB onboard memory
- PCMCIA memory option for additional storage
- Multilane operation up to 42 inputs
- Scheme “F” or user-defined classification
- Solar power option
- US standard or metric units
- Water-resistant air switch
- Weatherproof housing
- Integral keyboard with 4 line LCD readout.
- Separate battery compartment
- Battery “sentinel”
- Auto daylight savings time
ADR-3000 Plus Rack-Mounted Traffic Counter/Classifier
The Peek ADR-3000 Plus provides optimal functionality as a permanent site
unit. The basic unit provides a CPU module, a Power Management Unit (PMU) with a battery, an eight-input piezo sensor module, an eight-input loop sensor module, and a communications port with full 19,200 baud telemetry facilities. With the various options, the ADR-3000 Plus can count up to 64, or classify up to 32 lanes of traffic, including up to 24 WIM sensor inputs.
Several exclusive features have been incorporated into the ADR-3000 Plus. The CPU electronics are fitted with a replaceable socket mounted fuse, protecting against an accidental power reversal, and subsequent damage. Front panel mounted LED’s indicate a successful start up of the microprocessor by blinking twice during the boot cycle. LEDs also warn of system fault conditions and indicate the communications port activity and status. Additionally, a reset switch that is mounted on the front panel of the ADR-3000 Plus can be used to re-start the CPU. This provides an easy method of restarting a unit during diagnostics, similar to cycling power off and on.
Features of the ADR-3000 Plus
- Permanent rack mounted traffic counter/classifier/WIM
- Simple to set up and operate
- 2 MB onboard memory
- Multilane operation
- PCMCIA memory option - for additional storage
- Up to 64 inputs with a variety of sensor options
- Scheme “F” or user-defined classification scheme
- High-speed communications and telemetry
- U.S. standard or metric units
- Optional integrated control panel with LCD readout
- Solar power options
- Battery “sentinel”
- Auto daylight savings time
Product Information about the ADR Product Line
